Ultra Yield® Plasmid System

High Yield, Supercoiled Plasmid DNA Production

Engineered for modern plasmid production. Advanced flask design and nutrient-rich media work together to save time and maximize yields of transfection-ready plasmid DNA.

Request a Sample

Trusted by plasmid teams at:

  • Pfizer
  • GenScript
  • Aldevron
  • Novartis

*Not affiliated with Thomson Life Sciences

  • 10X

    on average more plasmid than standard LB workflows

  • 85%+

    supercoiled, transfection-ready DNA

  • <0.1EU/µg

    endotoxin.
    Skip endotoxin removal step

“Our customers are achieving exceptional maxi prep yields using just 30mL of Plasmid+® Media with the Thomson Ultra Yield® Flasks. For the AmMag™ Quattro workflows, that means more plasmid from less culture volume while maintaining quality, purity, and low endotoxin levels.”

Lucina Rosselli, PhD, Head of FAS, GeneScript
Lucina Rosselli

More Plasmid From Less Volume

Same yield, one-tenth theculture volume

Scaling plasmid the usual way means more flasks, more media, and more volume to spin down and purify. The Ultra Yield® flask and Plasmid+® media reach the same maxi, mega, or giga yield in a fraction of the culture. In one study, that meant 2.5 mg from 60 mL instead of 500 mL. Smaller flasks, less media per prep, and far less lysate through your columns downstream.

See the Data
Plasmid yield per flask: 287.71 µg with LB medium in Erlenmeyer flasks versus 6247.85 µg with Plasmid+ medium in Ultra Yield® flasks.

Quality

85%+ supercoiled,transfection-ready

Yield only counts if the plasmid transfects. Because the enriched, well-buffered media holds pH and limits the acetate buildup that stresses cells, cultures stay healthy through growth and the DNA stays intact, keeping a high fraction supercoiled rather than nicked or open-circular. The result is cleaner input for transfection and more consistent downstream results, run to run and construct to construct.

See the Data
Auto-scaled chromatogram showing 91% supercoiled DNA, 1% open-circular DNA, and 8% unknown material.

Transfection-Ready

Skip Endotoxinremoval step

High-endotoxin prep forces an extra purification step before anything touches mammalian cells, adding time, cost, and yield loss. In a Bionova study producing Gen-3 lentiviral plasmid, the system delivered <0.6 EU/mg, 16x below the ≤10 EU/mg criteria, clean enough to eliminate the removal step. Watch the full method and data in the webinar.

Watch the Webinar

The Flask

Better aeration,healthier cultures

Plasmid yield tracks cell density, and density depends on oxygen. The Ultra Yield® flask's baffled design delivers ~7x the oxygen transfer rate (OTR) of a traditional flask, so cultures grow healthier and denser on the same medium. In a Pfizer study that meant 6.1x more recovered yield and ~3.5x higher cell density, the foundation Plasmid+ builds on.

See the Data

610%

more recovered yield vs a traditional flask, same medium (6.1x)

Blueprint showing the Ultra Yield® flask and its baffled base.

The Ultra Yield® Plasmid SystemHow the three componentswork together

When every component in your setup is engineered to reinforce the others, your cultures perform more consistently, with greater yields. The Ultra Yield® three-component plasmid system brings together Ultra Yield® flasks that deliver maximum aeration, Plasmid+® enriched media that sustains high-density growth, and vented screw caps that maintain sterile gas exchange throughout culture. Each supports a different aspect of your microbial workflow, and together they carry your culture from setup to harvest.

  • Ultra Yield® flask containing microbial culture.

    Ultra Yield® Flask

    Baffled geometry drives high oxygen transfer, so dense cultures keep growing instead of stalling. 125 mL to 2.5 L, sterile, autoclavable, fits standard flask clamps.

  • Plasmid+ medium being poured into an Ultra Yield® flask.

    Plasmid+® Media

    Formulated for high plasmid yield and 85%+ supercoiled DNA. Animal-origin-free and ready to use: add antibiotics and grow.

  • Vented screw cap fitted to an Ultra Yield® flask.

    Vented Screw Caps

    A sterile 0.2 µm hydrophobic membrane keeps gas exchange going for the full run without breaking sterility.

Ready to evaluate the Ultra Yield® Plasmid System?

Request A Sample

Get the Most From Your SystemSix tips separate a good prep from a great one

Ultra Yield® Plasmid System delivers optimal yield when it's run as designed. Ensure your protocol follows these six parameters to maximize every prep.

  1. 1. Flask

    Match to your target prep

    Prep Size
    Miniprep
    Avg. DNA Yield
    20µg
    Vol. with Plasmid+
    0.5mL
    Rec. Vessel
    96-well Deep well plate
    Prep Size
    Midiprep
    Avg. DNA Yield
    100µg
    Vol. with Plasmid+
    4mL
    Rec. Vessel
    24-well Deep well plate
    Prep Size
    Maxiprep
    Avg. DNA Yield
    1mg
    Vol. with Plasmid+
    30mL
    Rec. Vessel
    125mL Ultra Yield® Flask
    Prep Size
    Megaprep (high copy)
    Avg. DNA Yield
    2.5mg
    Vol. with Plasmid+
    75mL
    Rec. Vessel
    500mL Ultra Yield® Flask
    Prep Size
    Megaprep (low copy)
    Avg. DNA Yield
    2.5mg
    Vol. with Plasmid+
    300mL
    Rec. Vessel
    1.5L Ultra Yield® Flask
    Prep Size
    Gigaprep
    Avg. DNA Yield
    10mg
    Vol. with Plasmid+
    500mL
    Rec. Vessel
    2.5L Ultra Yield® Flask
    Row 1 of 6
    Matchto your prep
  2. 2. Fill

    Recommended volume, not more

    Flask Size
    125mL
    Fill Vol.
    35-50mL
    Flask Size
    250mL
    Fill Vol.
    75-100mL
    Flask Size
    500mL
    Fill Vol.
    150-200mL
    Flask Size
    1.5L
    Fill Vol.
    300mL
    Flask Size
    2.5L
    Fill Vol.
    500mL
    Row 1 of 5
    Up to 30%more yield at the right fill
  3. 3. Antifoam

    Sigma 204 at 1:5000

    Foam lowers oxygen transfer and slows growth.

    Every Prepprotects aeration
  4. 4. Shaker Speed

    350-400 rpm, 1″ orbit

    Under-shaking starves the culture of oxygen.

    Up to 50%more at full speed
  5. 5. Growth Phase

    16-22 hours growth time

    Longer culture means more cell doublings.

    Up to 50%more with full growth time
  6. 6. Maximize Yield

    Reduce Cell Pellet

    Prep Size
    Miniprep
    Avg. DNA Yield
    20µg
    Input
    0.5mL
    Prep Size
    Midiprep
    Avg. DNA Yield
    100µg
    Input
    4mL
    Prep Size
    Maxiprep
    Avg. DNA Yield
    1mg
    Input
    1.5g
    Prep Size
    Megaprep (high copy)
    Avg. DNA Yield
    2.5mg
    Input
    2g
    Prep Size
    Megaprep (low copy)
    Avg. DNA Yield
    2.5mg
    Input
    2g
    Prep Size
    Gigaprep
    Avg. DNA Yield
    10mg
    Input
    5g
    Row 1 of 6
    Up to 10Xmore DNA per gram or plasmid per gram

Make sure that you're designing an experiment that maximizes your efficiency.

Design Your Experiments With An Expert

Hamza Sahil fromPfizer® on Plasmid+® Media

Filmed at: SLAS

FAQFrequently Asked Questions

How do I increase plasmid yield from E. coli  in shake flasks?
Oxygen transfer is the biggest lever. Baffled flask designs, like Ultra Yield® flasks, dramatically increase the air-liquid surface area during shaking, which raises cell density and directly improves plasmid DNA output.
What is the best media for high-density microbial culture?
Standard LB and TB media deplete nutrients early in the growth curve, capping cell density and final yield. Enriched formulations like Plasmid+® are designed to sustain high-density microbial growth significantly longer without autoclaving or supplementation beyond antibiotics.
Why are my shake flask yields inconsistent between batches?
Inconsistent microbial yields are most often caused by variable oxygen transfer and unreliable sealing methods like foil or cotton plugs, which degrade over the course of culture. Using a standardized baffled flask with a consistent gas-permeable seal eliminates two of the most common sources of batch-to-batch variability in shake flask fermentation.
How does flask design affect oxygen transfer in microbial culture?
Baffled geometry disrupts the liquid flow during orbital shaking, increasing the air-liquid surface area and oxygen transfer rate. Ultra Yield® flasks use a six-baffle design optimized for microbial fermentation, delivering up to 10x the aeration of standard smooth-walled Erlenmeyer flasks.
What is the best way to seal shake flasks for aerobic microbial growth?
Foil, cotton plugs, and foam stoppers degrade over the course of culture and introduce batch-to-batch variability. For plasmid production, a vented screw cap is the better choice. The Ultra Yield® Vented Screw Cap provides consistent oxygen exchange and contamination-free closure throughout your run.
How do I scale from 96-well colony screening to shake flask production?
Screen clones in 96-well plates with Airporous seals and enriched media to identify top performers at the MINI-prep scale. Then transfer winners directly into Ultra Yield® flasks with the same media and aeration principles to scale into MIDI- or MAXI-prep volumes.
Can I use Plasmid+® media with my existing flasks?
While you'll see an improvement, the media alone won't reach the yields on this page. Plasmid+® roughly doubles cell mass over LB in a standard flask, but returns more than five times as much in an Ultra Yield® Flask. The media was formulated for a flask that can keep up with it.

Thomson Life Sciences is not affiliated with Pfizer, GenScript, Aldevron, Novartis, Bionova Scientific, Asahi Kasei, Scarab Genomics, INFORS HT, or Sigma-Aldrich.